Correct operation steps of mini telescopic loader I. check the vehicle: 1. Check the mini telescopic loader fuel, cooling water and lubricating oil. 2. Check the mini telescopic loader reliability of service and parking brakes. 3. Check the mini telescopic loader operation of the bucket system when it is empty. 4. Check the items related to the loader in the forklift inspection content. 2、 Start: L. before mini telescopic loader starting, observe all around and confirm that there are no obstacles hindering safe driving, whistle first, and then mini telescopic loader start. 2. Start only when the reading of the brake barometer reaches the specified value. 3. Do not accelerate suddenly when starting, but start smoothly. 3、 Driving: 1.telescopic mini loader Remove the safety connecting rod of the front and rear vehicle bodies before driving and keep it properly. 2. When driving on the ramp, make the crank lever in the on position, and the crank must be in the forward direction. 3. Changing the telescopic mini loader driving direction and driving lever must be carried out after the vehicle stops. 4. When carrying materials, keep the lower hinge point of the boom more than 400mm above the ground. Do not lift the bucket to the highest position to transport materials. 5. Try to avoid telescopic mini loader driving sideways on slopes and shoveling materials