New mini wheel loadermatters needing attention during using !

 

 

1.  New mini wheel loader  General safety precautions

 

① Before using the  New mini wheel loader , the driver and relevant personnel must carefully read the operation and maintenance manual or operation and maintenance manual provided by the manufacturer, and do according to the items specified in the data. Otherwise,  New mini wheel loader  will bring serious consequences and unnecessary losses.

 

② The  New mini wheel loader  driver shall wear safety requirements and wear necessary protective facilities.

 

③ If the  New mini wheel loader  operation area is small or dangerous, warning signs must be displayed in the area or dangerous points.

 

④ It is absolutely forbidden for  New mini wheel loader vdrivers to drink or drive excessively tired.

 

⑤ When carrying out maintenance or inspection in the central hinge area, install the "anti rotation rod" to prevent the front and rear frames from rotating relative to each other.

 

⑥ After the loader stops steadily, get on and off the loader at the place with ladder handrails. Do not jump up and down when the loader is working or walking.

 

⑦ When the loader needs to be lifted for maintenance, the lifted boom must be firmly padded to ensure that the boom will not fall under any maintenance condition.

 

2. new mini wheel loader h580t Safety precautions before engine start

 

① Check and ensure that the lighting of all lamps and all display lamps can display normally. In particular, check the normal display of the turn signal lamp and the brake display lamp.

 

② Check new mini wheel loader h580t and ensure that no one is allowed to work under the vehicle or near the loader when starting the engine, so as to ensure that the safety of himself or others will not be endangered in case of accidents.

 

③ The new mini wheel loader h580t variable speed control handle of the loader shall be turned to the neutral position before starting.

 

④ For the  mini wheel loader h580t braking system without emergency braking, the hand brake handle plate shall be moved to the parking position.

 

⑤ Only start or run the engine in a place with good air flow. If  mini wheel loader h580t is running indoors, connect the exhaust port of the engine to or face the outside.

 

3. Safety precautions after engine startup and during operation

 

① After the HQ910Pro mini loader engine is started, wait until the brake air pressure reaches the safe air pressure before starting, so as to ensure the braking safety during driving. If there is emergency braking, press the button of the emergency and parking brake valve (the button can be pressed only when the air pressure reaches the allowable starting air pressure, otherwise it will jump up automatically). Only after the emergency and parking brake are released can the emergency and parking brake be engaged to start in gear I. If there is no emergency braking, just put down the parking brake handle and release the parking brake to start.

 

② Remove the  HQ910Pro mini loader fault objects of the loader on the road, and pay special attention to the obstacles such as iron blocks and ditches to avoid cutting the tire.

 

③ Adjust the  HQ910Pro mini loader rear-view mirror so that the driver can have the best view effect when seated.

 

④ Ensure that the horn, reverse signal lamp and all safety devices of the loader can work normally.

 

⑤ When you are about to start or check that the steering is flexible and in place, you should first sound the horn to warn the surrounding personnel to pay attention to safety.

 

⑥ Before starting and walking, all joysticks, pedals and steering wheels shall be tested first to confirm that they are in normal state before entering the operation. Pay special attention to check whether the steering and braking are in good condition. Only after the steering and braking are confirmed to be completely normal can the vehicle be started.

 

⑦ When  HQ910Pro mini loader traveling, place the bucket at a height of about 400mm above the ground. When working on mountain slopes or crossing ditches and other obstacles, slow down and turn small corners, and pay attention to avoid overturning. When the loading surface starts to slide to one side on a steep slope, it must be unloaded immediately to prevent further sliding

 

⑧ Try to avoid too many tires and excessive slipping during operation; Try to avoid two wheels hanging in the air, and it is not allowed to continue the operation with only two wheels on the ground.

 

⑨ When working as a tractor, it is only allowed to hook up with the traction device. No one is allowed to stand between the towed object and the loader, and a certain safe distance shall be maintained to prevent safety accidents.

 

4. Safety precautions during shutdown

 

① The loader should stop on a flat ground and place the bucket flat on the ground. After the engine is shut down, it is necessary to pull the operating handle of the working device repeatedly to ensure that all hydraulic cylinders are in a pressure free rest state. When the loader can only stop on the ramp, the tires shall be firmly padded.

 

② Put various handles in neutral or middle position

 

③ First remove the log wood loader electric lock key, then turn off the main power switch, and finally close the doors and windows.

 

④ It is not allowed to stop in the area with open fire or high temperature to prevent the tire from being heated and exploding, which may cause accidents.

 

⑤ When log wood loader using the combination valve or air tank to inflate the tire, people shall not stand in the front of the tire to prevent explosion injury.

www.haiqinmachinery.com