The purpose of regular maintenance for mini telescopic loader maintenance is to reduce the failure of the machine and prolong the service life of the machine; Reduce the downtime of the machine; Improve work efficiency and reduce activity-based cost. As long as the telescopic mini loader fuel, lubricating oil, water and air are well managed, the failure can be reduced by 70%. In fact, about 70% of failures are caused by poor management.
mini telescopic loader Fuel management
mini telescopic loader Diesel oil of different brands shall be selected according to different ambient temperatures; Diesel oil shall not be mixed with impurities, ash and water, otherwise it will cause premature wear of fuel pump; The telescopic mini loader high content of paraffin and sulfur in inferior fuel will damage the engine; After daily operation, the fuel tank shall be filled with fuel to prevent water droplets on the inner wall of the fuel tank; Open the drain valve at the bottom of the fuel tank to drain water before daily operation; After the engine runs out of fuel or the filter element is replaced, the mini telescopic loader air in the pipeline must be exhausted lubricating grease management
The use of mini telescopic loader lubricating oil (butter) can reduce the wear of moving surface and prevent noise. When telescopic mini loader storing the lubricating grease, it shall not be mixed with dust, sand, water and other impurities; the lithium based grease G2-L1 has good anti-wear performance and is suitable for heavy load conditions; when filling, all the telescopic mini loader old oil shall be extruded and wiped as far as possible to prevent sand and soil adhesion. www.haiqinmachinery.com
Maintenance of filter element:
The mini telescopic loader filter element plays the role of filtering impurities in the oil circuit or gas circuit to prevent them from invading into the
system and causing faults; Various filter elements shall be in accordance with Replace the telescopic mini loader filter element regularly according
to the requirements of (operation and maintenance manual); when replacing the filter element, check telescopic mini loader whether there is metal
attached to the old filter element. If telescopic mini loader metal particles are found, timely diagnose and take improvement measures; use the pure
filter element that meets the requirements of the machine. The telescopic mini loader filtering capacity of the fake and shoddy filter element is poor,
and the surface and material quality of the filter layer do not meet the requirements, which will seriously affect the normal use
of the machine