Forklift loader Regular maintenance can reduce the failure of the machine

 

The management of Forklift loader  fuel oil shall select different brands of diesel oil according to different ambient temperatures; Forklift loader  Diesel oil shall not be mixed with impurities, lime soil and water, otherwise the fuel pump will wear prematurely; The high content of paraffin and sulfur in inferior fuel will damage the engine; Forklift loader After daily operation, the fuel tank shall be filled with fuel to prevent water droplets on the inner wall of the fuel tank; Before daily operation,Forklift loader open the drain valve at the bottom of the fuel tank to drain water.

 The Forklift loader  filter element plays the role of filtering impurities in the oil or gas circuit to prevent impurities from invading the system and causing faults; Forklift loader Various filter elements shall be replaced regularly according to the requirements of the operation and maintenance manual.
www.haiqinmachinery.com

The use of forklift crane lubricating oil (grease) in lubricating oil management can reduce the wear of moving surface and prevent noise. Grease shall not be mixed with dust, sand, water and other impurities during storage.

Regular maintenance. After the new forklift crane machine works for 250 hours, replace the fuel filter element and additional fuel filter element; Check the engine valve clearance. Routine maintenance; 

Check, clean or replace the air filter element; Clean the inside of the forklift crane cooling system; Check and tighten the track shoe bolts on forklift crane; Check and adjust the rear tension of the track; Check the air inlet heater; Replace the bucket teeth; Adjust bucket clearance; 

Check the liquid level of front window cleaning fluid; Check and adjust the air conditioner; Clean the floor in the cab; Replace the forklift crane crusher filter element (optional part). When cleaning the inside of the cooling system, after the engine is completely cooled, slowly loosen the water injection cover, release the internal pressure of the water tank, and then drain the water; forklift crane Do not clean the engine when it is working, because the high-speed rotation of the fan will cause danger; When cleaning or changing the coolant, park the machine on a level ground. Replace the coolant and corrosion inhibitor.