Common problems in daily maintenance of chinese wheel loader, swekip 1850 loader, forest loader etc.

You can only move forward, not backward

 

www.haiqinmachinery.com  , www.haiqinloader.com 

 

First,Wholesale Mini Wheel Loader check whether the pressure indicated by the transmission pressure gauge is normal. Mini Wheel Loader  If the reverse gear pressure decreases, it proves that there is too much oil leakage in the reverse gear. The Mini Wheel Loader  gearbox must be lifted out and disassembled for inspection. Take out the Mini Wheel Loader  reverse piston, replace the Mini Wheel Loader  piston ring, check the damage of the friction plate, replace the seriously worn friction plate, and readjust the reverse clearance to 1.6-2.6mm; 

If swekip 1850 loader the reverse gear does not depressurize, it proves that the forward gear is stuck.swekip 1850 loader If the reverse gear cannot travel due to the slip of the reverse gear friction plate, the gearbox must be lifted out and swekip 1850 loader disassembled to check whether the isolation ring on the first gear inner gear ring is broken. Because the fragment can jam the first gear friction plate, the reverse gear friction plate slips and does not work, so it can only move forward but not backward. Take out swekip 1850 loader the isolation ring and replace swekip 1850 loader it with a new one.