Common problems in daily maintenance of radlader, mini hoflader, hytec loader

Radlader ,min hoflader,Weak first gear and reverse gear, track mini loader  slow driving in second gear
www.haiqinmachinery.com

 

First, Radlader ,min hoflader check whether the pressure indicated by the transmission pressure gauge is normal. If the pressure reaches 108kpa, increase the throttle to check whether the pointer of the pressure gauge swings; If Radlader ,min hoflader it swings violently, it Radlader ,min hoflader indicates that the turbine oil in the transmission is too dirty or insufficient. Radlader ,min hoflader Check whether the oil level inspection plug of the transmission can flow out of the turbine oil. If oil flows out, 

Radlader ,min hoflader the fault is caused by dirty oil. track mini loader Clean the gearbox and filter, and then replace with new oil; If track mini loader the oil quantity is normal and the indication of the transmission pressure gauge is normal, the track mini loader  fault may be that the input secondary gear between the transmission belt and the torque converter is broken, so track mini loader  that the power of the secondary gear of the torque converter cannot be output, and track mini loader  only the power of the primary gear can be output. 

Troubleshooting: track mini loader  remove the connection between torque converter and gearbox and replace the damaged input secondary gear.