Common problems in daily maintenance of chinese Radlader,farm loader, Track excavator, shovel loader, front loader, forest loader etc.

The snow plow wheel loader shift pressure, boom,snow plow wheel loader  bucket and steering are normal, but the loader still cannot move forward and backward, snow plow wheel loader First check whether the transmission is short of oil and whether the oil inlet pipeline is blocked, 

and then check the transmission oil pan (electrical motor) and snow plow wheel loader  torque converter filter. If mini radlader metal fragments are found,

 snow plow wheel loader is certain that the parts in the large overrunning clutch in the transmission are damaged. If aluminum chips are found in the transmission oil pan and torque converter filter, snow plough wheel loader is certain that the parts in the torque converter are damaged. snow plough wheel loader At this time, the transmission and torque 

converter must be disassembled and inspected for repair and replacement of damaged parts. If snow plough wheel loader the above reasons are eliminated and the vehicle still 

cannot walk, mini radlader can be determined that the bolts around the second gear component in the gearbox are cut off, or mini radlader  the output gear of the intermediate shaft falls off, so that the power cannot be output. Troubleshooting: disassemble the 8-shaped end cover of the gearbox, take out the second gear component, and snow plough wheel loader replace the cut-off bolt. The mini radlader bolt material is 40Cr, snow plough wheel loader which must be quenched and tempered, and mini radlader can never be replaced by ordinary bolts.

www.haiqinmachinery.com

www.haiqinloader.com