excavator loader 15-10 During operation, the temperature of each component has its own normal range. For example, the temperature of general cooling water is 80~90 ℃, and the temperature of hydraulic oil of hydraulic transmission system is 30~60 ℃. At the same time, it is also necessary to inspect and replace the air and fuel filters to ensure the purity of the air and fuel, and to avoid pollution and blockage.
backhoe machine In addition, it is also important to regularly check and replace the hydraulic oil of the forklift.
4x4 backhoe loader Hydraulic oil is an important component of the forklift hydraulic system and aolite small backhoe,rippa backhoe needs to be kept clean and sufficient to ensure the normal operation of the hydraulic system.
The jcb 3cx loader hydraulic oil needs to be replaced regularly to avoid corrosion and pollution, and the level and quality of the oil also need to be checked regularly to ensure the normal operation of the hydraulic system of the forklift.If the temperature is lower than or higher than this range, the wear of parts will be accelerated, the lubricating oil will deteriorate, and the material performance will change. The xcmg xc870k,shantui sbh388 test shows that the wear of main transmission gears and bearings of various excavators operating in lubricating oil at - 5 ℃ is 10~12 times higher than that operating in lubricating oil at 3 ℃ . www.haiqinmachinery.com