magni 3.6 ton telescopic forklift, In principle, each factory arranges people to purchase these parts in the market, and the handler submits the invoice or receipt together with the warehouse entry form and application form to the factory leader for approval before reimbursement. telehandler 625 Each factory should strictly control the quality and price. 2. The maintenance cost of mechanical equipment shall be settled monthly as much as possible, and the maintenance cost incurred in the current month shall be settled in the current month. All factories should carry forward the style of diligence and thrift, strengthen the maintenance and management of vehicles, and be careful in budget to reduce expenses.
rotating diesel telescopic handler Common problems in daily maintenance of radlader ,mini hoflader hytec loader.
Radlader ,min hoflader,Weak first gear and reverse gear, track mini loader slow driving in second gear
First, Radlader ,min hoflader check whether the pressure indicated by the transmission pressure gauge is normal. If the pressure reaches 108kpa, increase the throttle to check whether the pointer of the pressure gauge swings; If Radlader ,min hoflader it swings violently, it Radlader ,min hoflader indicates that the turbine oil in the transmission is too dirty or insufficient. Radlader ,min hoflader Check whether the oil level inspection plug of the transmission can flow out of the turbine oil. If oil flows out,
Radlader ,min hoflade the fault is caused by dirty oil. track mini loader Clean the gearbox and filter, and then replace with new oil; If track mini loader the oil quantity is normal and the indication of the transmission pressure gauge is normal, the track mini loader fault may be that the input secondary gear between the transmission belt and the torque converter is broken, so track mini loader that the power of the secondary gear of the torque converter cannot be output, and track mini loader only the power of the primary gear can be output.
Troubleshooting: track mini loader remove the connection between torque converter and gearbox and replace the damaged input secondary gear.
4、 mini telehandler Establish a regular supervision and inspection system. The company office, the comprehensive supervision department and the vehicle management office should regularly supervise and inspect the vehicle maintenance to prevent violations.The engine works normally and the loader cannot walk
telehandler t3007 First eu license loader check the transmission oil limit valve and transmission pressure gauge. If zl08 Radlader it is found that there is a lack of transmission torque converter oil,cpd-5 telehandler add new oil. However,China loader it should not be added too much, otherwise it will cause the transmission to heat up. Generally,
Hoflader it is added until the Schaffer Loader oil flows out of the limit valve. Then hank telehandler check whether the boom can rise and fall and whether there is steering. If the boom can rise and fall, it can also turn, and the loader cannot walk, which is caused by the damage and lack of oil of the variable speed pump. The boom cannot rise and fall or turn, and the loader cannot walk. This situation is mostly caused by the steel plate connection of the torque converter (mean machine) being cut off by bolts or the elastic plate being broken. The diesel engine and gearbox must be lifted out together, and then the connecting part of the diesel engine of the torque converter must be removed to find out the damaged parts and replace or repair the damaged parts.
www.haiqinmachinery.com