backhoe loader 3cx,new cat backhoe,backhoe dozer with jack hammer,shanmon 388h,sany sy330h,excavator sany 330 for sales


 backhoe loader 3cx Maintenance procedures and requirements: 1. All loaders and excavators shall be subject to the repair application system. When the driver finds that the vehicle has a fault and needs to be repaired, he shall report it to the forklift or hook foreman of the factory for inspection according to the fault condition. If the factory can repair earthmoving backhoe  itself, the factory shall repair it itself. If the backhoe loader hqm388 vehicle cannot be repaired by itself, fill in the vehicle maintenance application form and submit it to the factory leader for review. Then, the factory leader reports to the company's vehicle management office for repair. The company's vehicle management office shall arrange repairmen to repair the vehicle in a ulldozer 130hp shantui small timely manner according to the fault conditions. Each repair shall be carried out with one order for each vehicle. After the repair is completed, one copy of the repair application form shall be submitted to the warehouse keeper for retention, and the other copy shall be brought back by the repairman to the vehicle management office for storage in the vehicle file. The warehouse keeper of each factory shall fill in the machine equipment maintenance and parts replacement account according to the maintenance situation, and report the registration of the month to the company together with the material inventory form at the end of the month.

Kingway wheel loader When replacing hydraulic oil, brake fluid, gear oil and lubricating oil, the Europe kingway models specified by the loader manufacturer must be used, and special attention shall be paid to that different types of brake fluid cannot be mixed.

2. Laigong wheel loader In winter (generally, the temperature is below - 5 ℃) the engine shall be preheated before starting, and the engine shall not be started until it is preheated above 30 ~ 40 ℃. The water tank shall be filled with antifreeze (for vehicles that do not use antifreeze in winter, the cooling water in the water tank, engine body and heater must be drained every day when the machine is not working).

3. everun brand wheel loader It is strictly prohibited for the user to refit the loader without permission. The manufacturer is not responsible for the quality problems caused by refitting.

4. loader taian luneng The diesel used by the loader must be pure and precipitated for at least 72 hours, and the diesel brand shall meet the specified requirements.

5. chenggong loader The hydraulic transmission oil used in the gearbox and torque converter and ER20 LOADER  the hydraulic oil used in the hydraulic system must be clean.excavator sany 330 parts received or purchased must be delivered to the warehouse of the factory for warehousing acceptance. The warehouse keeper must be conscientious and responsible for the acceptance and make a good registration.

3. The driver shall keep a good appearance at all times, check, maintain and maintain frequently, and always keep a good condition to ensure safe driving.

4. During the maintenance of mechanical equipment, the driver of the vehicle must cooperate throughout the whole process. After the vehicle is repaired, the driver shall carefully inspect the vehicle repair and return the replaced parts to the factory warehouse. www.haiqinmachinery.com

 

5. The company's vehicle management office shall establish basic information and maintenance files for all forklift and hook trucks of the company,

ake sure that one car has one gear, and timely register the maintenance.