VANSE WSC740 telehandler with cummins engine, manitou telehandler 18 meters with CE, everun telehandler ER3070 with CE


 telehandler 1500 Difficulty turning off and starting a hot car

In addition to the difficulty of restarting the hot car after stalling, this fault may also cause the xcmg telescopic handler loader to suddenly stall during operation. It is difficult to start a hot car after turning off the engine and may stall while driving, mainly due to poor water return from the return pipe. It is necessary to ensure smooth water return. To solve this problem, it is necessary to check the return water condition of the return pipe at the upper end of the antifreeze storage tank after heating the car, to ensure smooth return water and avoid excessive water temperature caused by poor or blocked return water.

VANSE WSC740 telehandler Poor cooling effect of air conditioning

In some cases, the manitou telescopic handler loader may exhibit good air conditioning and cooling effects when the car is cold, but when the TH4018 telehandler is hot, the air conditioning cooling may be insufficient and accompanied by obvious abnormal noise. When the car is cold, the air conditioning is good, but when it is hot, the effect is poor, which is related to the non-standard replacement of antifreeze. This is also related to the issue of high water temperature. During the maintenance process of the loader, if the addition or replacement of antifreeze is not carried out in a standardized manner, it may interfere with the smoothness of the engine water tank and waterway, leading to blockage and high water temperature. Original accessories should be selected, and careful attention should be paid to ensuring that all components are properly installed to prevent blockages.www.haiqinmachinery.com