wolf 3350t telehandler Inspection and maintenance of important parts
Check the key parts such as transmission, rotation, and telehandler forklif connection, and rotate them by hand to see if they are normal and if there is any interference between the components.
TL875 telehandler Check and replace lubricating parts. Mainly refers to the lubrication of bearings, gears, sprockets, and other parts. Insufficient or excessive lubrication of bearings can lead to bearing damage or premature wear, while insufficient lubrication of gears or sprockets can cause problems such as loud noise and unstable operation. Therefore, MST Mp14.42 telehandler during spring maintenance, the lubrication of these parts should be checked in a timely manner, and the corresponding lubricating oil or parts should be replaced to extend the service life of the machine. When adding lubricating oil, the appropriate lubricating oil should be selected according to the SYNBON TELEHANDLER machine's user manual and added to the lubrication system as required. At the same time, attention should be paid to the sealing of the lubrication system to prevent oil leakage or contamination.When the FT40 telehandler power of the diesel telehandler 18t engine is insufficient and it emits water vapor and white smoke, you can approach the muffler with your hand. If there are water droplets on the surface of your hand when the white smoke grazes, it indicates that water has entered the cylinder. www.haiqinmachinery.com