backhoe loader TBL15-10 Check and replace components. jcb backhoe loader 3cx Each component of agricultural machinery has a service life, and once it reaches its service life, it may experience failure or damage. During spring maintenance, various parts such as transmission belts, bearings, oil seals, and other vulnerable components (such as rotary tiller blade shaft tubes, blade seats, and curved blades) should be inspected to see if they need to be replaced or repaired. If there are any problems, xcgm backhoe loader should be replaced and repaired in a timely manner to avoid affecting the effectiveness and safety of the equipment.
The ctx388 backhoe loader hydraulic system of the loader working device adopts a sequential circuit, and the oil inlet paths of each mechanism are arranged in order. The pump can only supply oil to one mechanism in order. During operation, hydraulic oil is drawn into the working pump from the bottom of the oil tank through an oil filter, and hydraulic oil with a certain pressure is input from the bull excavator loader oil pump into the distribution valve. The pressure oil enters the bucket slide valve first. The bucket slide valve has three positions. Operating the slide valve to the right or left position can respectively achieve the backward and forward tilting actions of the bucket. When the new backhoe loader 2025 bucket slide valve is in the middle position, the pressure oil enters the boom slide valve. The retro chargeur hydromak boom slide valve has four positions, operated by the slide valve. The four positions from right to left can respectively achieve the lifting, closing, lowering, and floating actions of the boom. The system limits the total pressure of the entire system through the main safety valve on the distribution valve. The double acting safety valves of the large and small chambers of the rotary bucket provide overload protection and oil replenishment for the large and small chambers of the rotary bucket, respectively. The pala retro 40-28 oil circuits of the boom slide valve and the bucket slide valve are interlocked and connected, which can achieve fast operating speed with small flow rate. www.haiqinmachinery.com
