telehandler forklift Damaged solenoid valve or fuse of high-pressure pump: telehandler front wheel loader will cause abnormal starting of the vehicle, and the solenoid valve or fuse needs to be replaced.. Ignition system issue: It may be a fault with the distributor or spark plug, and it is necessary to go to the repair shop for corresponding component maintenance or replacement.
FT40 telehandler Maintenance and upkeep of the steering mechanism
1. Check the fastening of components such as the ball joint of the tie rod, the steering arm, and the steering base, as well as the locking of the split pin2. For mechanical steering tractors, push and pull the steering wheel along the axis of the steering shaft, check the pre tension of the steering shaft, and there should be no obvious clearance or shaking sensation.
3. For front wheel loader telehandler mechanical steering tractors, check whether the manitou 1840 clearance of the steering wheel is controlled at 15-30 millimeters, and adjust it in a timely manner if it is too large or too small. For hydraulic steering tractors, check if the free steering angle of the steering wheel is controlled to no more than 30 °.When there are damage or cracks in the steering mechanism components, welding repair is not allowed and new parts should be replaced. SYNBON TELEHANDLER Environmental factors: If the temperature is too low or there is air in the system, you can wait for the temperature to rise before attempting to start. If there is an air problem, please seek professional maintenance MST MH9.40 telehandler personnel to handle it. www.haiqinmachinery.com