case 580 backhoe loader , TLS4CX backhoe loader Reasons and solutions for loader engine failure to start
excavator loader Injector solenoid valve
In addition, the injector solenoid valve is also an important component of the electrical system. If the injector solenoid valve malfunctions, the loader cannot ignite. In this case, it is necessary to replace the injector solenoid valve.
What are the reasons and troubleshooting methods for loaders not catching fire
Poor contact of power supply circuit
Damaged or faulty starter motor
The xcmj backhoe loader starting motor is an important component of the loader's starting circuit, which controls the on/off of the engine by controlling the current flow. If the electromagnetic switch malfunctions, it will cause the loader to fail to start. There may be many reasons for electromagnetic switch failures, such as poor contact, aging circuits, and burnt out electromagnetic coils. When the loader fails to start, jcb 1cx backhoe is necessary to promptly check the status of the electromagnetic switch to determine whether it needs to be replaced or repaired.
The FS40-35 Backhoe Loader power supply circuit of the loader may have issues such as open circuits or short circuits, which can prevent the Shantui SBH388 backhoe normal flow of current and prevent the machine from starting. To solve this problem, it is necessary to first check whether the power line is connected correctly. If looseness or poor contact is found, it needs to be reconnected. At the same time, it is necessary to check whether the power supply circuit is worn or damaged, and replace it in a timely manner if necessary. www.haiqinmachinery.com