Builder telescopic loader Ensure normal working load


Builder telescopic loader Ensure normal working load
 
The Builder telescopic loader magnitude and nature of working load of excavator have an important influence on the loss process of excavator. Generally speaking, the wear of parts increases proportionally with the increase of load. When the load borne by the part is higher than the average design load, its wear will increase. In addition, when other conditions are the same, the wear under stable load is smaller than that under dynamic load, with fewer failures and lower service life. The test shows that the wear of the cylinder will increase by two times when the engine works under unstable load compared with stable load. The engine working under normal load has low failure rate and long service life. On the contrary, if the herkleos telescopic engine is overloaded, the failure rate will increase significantly, and the service life will also be less than the design index. The mini garden loader telescopic wear of herkleos telescopic that are often in a wide range of load changes is greater than that of excavators that work continuously and stably. In general, the telescopic loader hytek tl3500 engine used by the mini garden loader telescopic generator has a longer service life than that used by bulldozers, excavators, etc. The normal working load mainly depends on the use of the mammut loader by the operator. First,heracles TL3500 loader pay attention not to work under the maximum load that the excavator can bear, and use the mammut loader within the capacity. As the excavator manager, when assigning the operator, he/she should hand over the data and operation manual attached to the mammut loader to the operator so that he/she can correctly master the excavator performance and operation process, and telescopic 3000kg wheel loader should not arbitrarily withhold the relevant data. Second, we should try to ensure that the excavator load is evenly increased or decreased, so that the excavator is in a relatively mammut loader gentle load change. Specifically, we should increase or decrease the throttle more evenly to prevent the action of the engine and working device from rising and falling.   www.haiqinmachinery.com